Analogue Electronics Training Sets (Plug-In System)
STE-6000
Downloadable Data Sheet
Training in Analogue Electronics using the EDU-LABS DIDACTIC Components Plug-in System
STE-6000
From a simple resistor to a highly integrated microchip, advanced training in electronics requires that the basic underlying principles are mastered completely. It is also necessary to establish the link between theory and practice as soon as possible. Bridging this gap is an important task, especially when it comes to mastering such complex technologies as those in the field of modern electrical engineering and electronics.
Using this system a wide range of experiments and circuits can be investigated in the areas of Analogue Electronics. These areas are divided into topic groups and arranged to prepare the student for progressively higher training goals. Each topic group is accompanied by an set of the same name for conducting experiments.
The Universal Plug-in Board
The universal plug-in board is necessary for all experiments and circuits used in the STE-6000 for analog electronics. The symmetrical arrangement of the socket areas, containing 9 electrically interconnected 4-mm sockets, makes possible the use of plug-in elements of different sizes with pin spacing of 19 mm, 50 mm and 100 mm. Contact resistance is less than 5 x 10-3 Ohm, permitting currents up to 10 A. Because of the low capacitance of 1.5 pF between adjoining areas, the universal boards are also suitable for experiments with high frequency circuits well into the MHz range.
The Plug-in Elements
The 2- and 4-terminal plug-in element consists of a transparent housing with a detachable front plate, and specially designed long-life plugs. Thus the built-in components are visible and can be easily replaced should they be damaged. The component symbols on the front allow for a close correspondence between circuit diagram and assembled circuit.
The plug-in elements are available in the following sizes:
• Plug-in element 2/19 with 2 pins
• Plug-in element 2/50 with 2 pins
• Plug-in element 4/50 with 4 pins
• Plug-in element 4/100 with 4 pins
This facilitates the transition from circuit diagrams in instruction books to self-designed circuits, as well as the listing of experiment set-ups, and encourages thinking, learning and experimenting in terms of circuit diagrams.
To aid the successful performance of experiments on analogue electronics, detailed experiment descriptions for students and accompanying information for instructors are available.
Literature
The manuals for each topic group begin with a description of components, units and abbreviations used, as well as an introduction, to the topics. The experiments are described according to well proven didactical principles in the form of student's work sheets and teacher's notes. In addition, solution sheets are available to the teacher.
Technical Details
• The Kit consists of PVC box, Series of plug-in components, universal patch panel and set of connecting leads/bridges.
• This is a plug-in system whereby circuit construction is achieved by assembling require plug-in components on the batch panel and interconnect together to form the desired experimental circuits. Each plug-in unit consists of a commonly available electronic component mounted on insulated boards. The patch panel can easily accommodate any externally connected test and measuring instrument.
• Equipment Lists consist of the following :
1. 1 x PVC box with patch panel and storage system for the :
2. 1 x resistor (22R, 1W), (47R, 1W), (56R, 1W)
3. 2 x resistor (100R, 1W)
4. 1 x resistor (220R, 1W), (470R, 1W)
5. 2 x resistor (1K, 1W)
6. 1 x resistor (1K5, 1W)
7. 3 x resistor (2K2, 1W)
8. 1 x resistor (4K7, 1W)
9. 2 x resistor (10K, 1W)
10. 1 x resistor (15K, 1W)
11. 2 x resistor (22K, 1W)
12. 1 x resistor (100K, 1W), (3R3, 5W), (10R, 5W), (22R, 5W), (68R, 5W), (100R, 5W), (220R, 5W)
13. 1 x potentiometer (1K, 0.25W), (50K, 0.25W), (500K, 0.25W)
14. 1 x NTC resistor
15. 1 x PTC resistor
16. 1 x LDR resistor
17. 2 x lamp (6V, 3W)
18. 4 x lamp (12V, 3W)
19. 4 x lamp – holder
20. 1 x Single-pole switch
21. 1 x Turn-Over Switch
22. 1 x Push Button (NC)
23. 1 x Push Button (NO)
24. 1 x Relay 12VDC 2-Pole (DPDT)
25. 1 x Relay 6VDC 1-pole (SPDT)
26. 1 x Transformer primary 350R-2250mH, secondary 40-0-40R, 2 x 145mH
27. 1 x Choke 0.1H, 0.15A
28. 1 x Polyester cap 0.01mF, 60V
29. 2 x Polyester cap 0.1mF, 60V
30. 2 x Electrolytic cap 22mF, 35V
31. 1 x Electrolytic cap 22mF, 35V
32. 2 x Electrolytic cap 220mF, 35V
33. 1 x Electrolytic cap 470mF, 35V
34. 1 x Earphone
35. 1 x Connecting board for earphone
36. 4 x Diodes Si 1N5404
37. 2 x Diodes Ge
38. 1 x Zener Diode 6.2V, 1W
39. 1 x Zener Diode 12V, 5W
40. 2 x Transistor PNP, BC177
41. 3 x Transistor NPN, BC107
42. 1 x Transistor NPN, MJE3055
43. 1 x Thyristor C106D
44. 10 x Connecting board with pins
45. 1 x power potentiometer 1 KO, 25W
46. 1 x Injunction 2N2646
47. 1 x Triac BTA08-400B
48. 1 x Diac DB3C609
49. 1 x FET 2N5458
50. 1 x Voltage regulator IC 7812
51. 1 x DC motor 6V, 2W
52. 1 x AC motor 6V, 2W
53. 2 x Bar magnet
54. 1 x pair of iron yokes
55. 2 x plotting compass
56. 1 x Direction-finding Compass
57. 4 x Magnetize able rod & nut MS
58. 1 x Hemisphere without magnet
59. 1 x Shaker for iron filling
60. 1 x Roll of thin thread
61. 4 x iron nails, 20mm long
Accessories
1. 5 X Leads black 20cm 2x4mm
2. 5 x Leads black 40cm – 1x4m + 1x2mm
3. 4 x Leads Blue 30cm – 2x2mm
4. 4 x Leads Red 20cm – 2x4mm
5. 8 x Leads Red 40cm – 1x4mm + 1x2mm
6. 1x Power Supply Unit 0-30VDC, 1A Regulated 0, 6, 12, 24, 42VA
7. 1 x Instruction & Operation Manual
System &
Solution at Affordable Price 
