| 1.Specifications |
|
|
|
|
|
|
|
|
|
|
| |
|
* Objective : Supporting product development with Bluetooth technology.
* Developing Environment : PC, firmware based.
* Hardware specifications
- Bluetooth Core chip : CSR BlueCore02-External
- Bluetooth module : Bluetooth Spec V1.1 Module (BlueSEMII, Class 2)
- Board Size : 190 x 160 x 60 [mm]
- Interface : USB / UART / SPI
- Power Supply : USB / Adaptor (9 V, 300 mA) / Battery (4.2 V, 100 mAH)
- Others : LED,Ear-microphone, I/O Connector, Parallel port
- Selectable I/O : 10 EA
- Selectable Buttons : 6 EA
- Test Point : 23 Point |
|
|
|
|
|
|
|
|
|
|
|
|
|
(Main Body) |
|
|
|
| |
|
|
|
|
|
|
|
|
|
* Software
- Application Signaling Documents : Headset, Audio-gateway, Hands-free,FTP
- Demonstration program : Voice, Chatting, File Transfer
- HCI Command Test Program : Using USB interface |
|
|
|
|
|
|
|
|
|
|
|
|
|
2. Characteristics |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* Bluetooth module featuring for various application softwares
* Module replacement type capable of supporting multi application development by turning Bluetooth chipset module into daughter-board
* Supporting various power supply types - able to select preferred type per each application
* Featuring all interfaces supported by Bluetooth chipset ( UART / USB / SPI / Parallel )
* Hardware for voice support application ( ear-microphone jack )
* Li-lon battery recharging available ( USB/Adaptor)
* Selection of hardware I/O port per different user available
* Hardware testing possible with test pin insert
* LED available for the status of each I/O
* Bluetooth protocol signaling chart available for application program development(Host/Embe
dded)
* Embedded Progamming is available using BlueLab SDK.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3. Featured Functions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* Bluetooth development tool
* Embedded Progamming available using BlueLab SDK.
* Voice communication (Headset profile)
* Data communication (FTP profile)
* Hardware check using test pin
* Li-lon battery recharging (Adaptor,USB)
* Selection of various power supply types (Adaptor / Battery / USB)
* Selection of Power (Button / Slide switch)
* Selective use of Bluetooth module I/O
* LED indication for Bluetooth module I/O
* Interface selection between host and host controller communication (External Support) |
|
|
|
|
|
|
|
|
|
|
|
|
|
4.Training Contents
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1) Introduction to Bluetooth Technology
2) Bluetooth Function Demo (Voice / Chatting/ File Transfer)
3) Interface Experiments (UART / USB/ SPI)
4) Hardware Experiments (PCM CODEC / Data Communication / RF / Power)
5) Signaling Process Education (Headset / Audio gateway / FTP)
6) Application Experiments (IO Port Control / LED Control / Sound Control / File Transfer)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5. Contents (Recommended) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Experiment 1. Introduction to Bluetooth Technology
Experiment 2. Program installation and instruction
- Demonstration : Chatting / Voice Comm.,FTP (File Transfer Protocol)
Experiment 3. Interface setup (UART, USB, SPI)
Experiment 4. Introduction to Hardware circuit
Experiment 5. Hardware measurements I
- PCM Codec Comm.
- Data Communication
Experiment 6. Hardware measurements II
- Radio Frequency energy spectrum
- Power supply method (Battery, USB, Adaptor )
Experiment 7. Signalling process I
Experiment 8. Signalling process II
Experiment 9. Application Experiment I
- Input and Output port control
- Encrypted file transfer
Experiment 10. Application Experiment II
- Communication using Headset and Audio gateway
Experiment 11. Application Experiment III
- Network Communication between Bluetooth Device.(Piconet Experiment)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6.BT-1000 Components |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* Main Body : 2 units
* Demo CD : 1 EA
* User Manual : 1 EA
* USB Cable : 2 EA
* UART Cable : 2 EA
* SPI Cable : 1 EA
* Adaptor : 2 EA
* Ear-microphone : 2 EA
* Audio Cable : 1 EA
* Packing Box : 1 EA
|
 |
System &
Solution at Affordable Price 
