Features
• Use the software development environment provided by CPLD/FPGA in studying latest logic design, substitute the complicated hardware design of TTL/CMOS.
• Capable to use circuit graphic and digital hardware descriptive syntax (VHDL/AHDL) to develop circuit.
• CPLD/FPGA provides free setting of pin, thus no hardware connection is required in case of test experience, save a lot of time for connection soldering, learn hardware operation promptly.
• Every I/O pin of CPLD/FPGA has logic status monitor, in order to facilitate speed understanding og each pin status.
• Clearly indicate the location of each pin, easy to visual and measure.
• Use print out to down load directly from manufacturer development system.
• Burn in CPLD/FPGA program into EPROM, the experimental device can operate stand-alone.
• Capable to perform 8051 and CPLD/FPGA match circuit test.
• Applicable for WIN95/98/NT, a series of item and document CAI, advance gradually, easy to understand and learn.
Specification
• Supported chip: ALTERA FLEX10K / XILINX XCIOTQ144 (TQFP 144pin),
employs modular design, flexibly replace with other brand CPLD or FPGA.
• Signal generation unit:
1. Programmable frequency generator
2. Standard frequency 1/10/100/1K/10K/100K/1M/10MHz
• Logic input switch:
1. 8 × 1 logic input original press point light.
2. 8 × 2 logic input Dip switch
3. 4 impulse press button generator (pulse 2 negative pulse)
4. 3 × 4 array keyboard.
• Output unit:
Logic status monitor indicator for logic status.
• 8 × 8 dual color point array LCD display.
1. LCD 16 × 2 monitor
2. 6 digits 7 nodes monitor
3. 3 × 4 LED output.
4. 1 set buzzer output
• Linear unit:
1. 2 sets 8bit D/A converter
2. 1 set 8bit A/D converter
• MPU unit:
8051 and CPLD/FPGA match circuit test
Test Content
• Combined logic design, simulation and test:
1. Basic logic
2. Deducter
3. Decoder
4. Combined logic
5. Comparator
6. Multiplexer
7. Adder
8. Compiler
9. Demultiplexer
• Sequential logic circuit design, simulation and test:
1. Flip-flop device
2. Shift register
3. Shift counter register
4. Synchronized counter
5. Non- Synchronized counter
• Analog logic circuit design, simulation and test:
1. A/D converter
2. D/A converter
Thematic Application Test
• 8 × 8 dual color spot array LED control
• Digital clock
• Counter
• Electronic alarm clock
• Traffic light control
• Electronic dice
• Keyboard scan
• LCD display control test
• A/D, D/A converter test
• Easy CPU design
• VHDL/AHDL voice design
• Matching 8051 thematic test
Application Program Range
1. Fundamental logic program
2. Digital circuit design program
3. Digital system design circuit program
4. Micro processor principle program
5. VLSI design program
6. OPLD/FPGA chip design program
7. 8051 single chip program
8. Thematic preparation
Electric specification
• AC100-240V, 50/60Hz AC input
• Print port down load interface
System &
Solution at Affordable Price 
