Home > Products > COMMUNICATION TRAINING SYSTEM > Fiber Optics Training Course, Project & Components > Fiber Optics Training System 2 > Fiber Optics Training System 3

Fiber Optic Splice/Connector This multi-purpose splice/connector is an expansion of our highly successful LED and photodetector product designs. It utilizes the same cinch nuts, alignment principles and no-fuss fiber terminations to quickly handle the three most common requirements for joining two fiber lengths. • Replacing damaged fiber segments • Combining two different fiber lengths • Bulkhead or patch panel connections To join two fibers, cut the fiber ends at a 90 degree angle, insert each into the connector and tighten the cinch nuts. Device features a 9mm inch-long 8-1 mm threaded flange for bulkhead or panel connections. Although the connector is designed for use with 750 and 1000 um core, 2.2 mm jacketed plastic fiber cable, it also is suitable for other fibers when special sleeves are used. Sleeves are available upon special request. STOCK NUMBER IF-C-S1 ST Style Connector Designed specifically for the installer who demands fast and easy assembly, top optical performance and low cost. The durable connector has metal housing with hard stainless alloy ferrule and polishes quickly. The connector’s rear design crimps directly on the cable and Kevlar® , eliminating cable pull-away from the connector. The ST connector is supplied with a 3 mm boot. STOCK NUMBER     IF-C-ST Fiber Size                 1 mm Typical Loss            .5 db Ferrule                      Stainless Magic Optic Rock (TV Stone) Nature created its own fiber optic material long before scientists even dreamed of today’s fiber optics communication networks. It is a rare natuarally occurring mineral ulexite. The stones are composed of thousands of tiny, parallel, hairlike crystals that transfer an image just like the coherent faceplates and light guides. They often are known by the name of TV stones because of their image-transferring property. Stone are approximately 1/2 inch (13 mm) thick and 3/4 x 3/4 inches (19 x 19 mm) across the face. STOCK NUMBER IF-C-FOR
LC Splice Kit The full-service solution for extending or mending jacketed 1000 um plastic fiber. Kit contains all the retention clips, fiber sleeves and assembly instructions to complete 10 splices. No polishing, adhesives or special tools required. STOCK NUMBER IF-C-S10	LC Connector Kit All components and complete instructions need to forge two bulkhead connections for jacketed 1000 um core, plastic fiber. No polishing, adhesives or special tools required. STOCK NUMBER IF-C-C10                                                  PAGE : 1  2  <3>  4