Home > Products > TEST & MEASURING INSTRUMENTS > Pulse Generators

Pulse Generator PG-1000C Catalog Download Features and usage 1. The Pulse Signal Generator - Maximum Pulse Output Voltage can reach +5V(50ohm Load). Its Repeated Frequency Range is selected by the Internal Oscillator Frequency (1MHz-10MHz) and Crystal Oscillator Frequency (10MHz). (1Hz-10MHz to choose INT mode, 10Hz-10MHz to choose X-TAL Mode) 2. At X-TAL mode, using the knob, by the 7 pre-set frequency range, you can set a frequency accurately. At the INT mode, you can set a stochastic Repeated Frequency. 3. It can generate a Pulse Wave of high quality (1Hz-10MHz),thus it has a very wide application in all kinds of circuit test. In the analyzing and design of a digital circuit, it can be used as a Clock Pulse Source.   Specifications 1.Oscillator Mode        INT Mode        EXT. Mode: +(up) , -(down)        Crystal Oscillator Mode: X-TAL        Single Oscillator Mode: Manu   2.Oscillator Frequency        INT: 1Hz-10MHz / 1-7 ranges     (Freq. changes at each range)        X-TAL: 10,100,1K,1M,10M(Hz) (Frequency stability: ㊣100ppm)   3.External Input        Max.Input Voltage : -1V, +10V        Input Voltage: ≡+1V         Pulse width: ≡20nS         Frequency width: 10Hz-10MHz 4.Single Oscillator Mode Input        Method: press the switch   5.Pulse Output        Output voltage: 0 ~ +5V adjustable (50次 Load)                              0 ~ +10V adjustable (open status)        Rising time     : <10nS (50次 Loadㄛ+2.5V -- +5V)        Falling time    : <10nS (50次 Loadㄛ+2.5V -- +5V)        Period INT      : 100nS-1000mS/ 1-7 ranges (Freq. changes at each range)        X-TAL           : 100nS-100mS /1-7 ranges   (Freq. fixed)        Delay time      : 0-50mS/1-7 ranges               (Freq. changes at each range)        Pulse width    : 50nS-50mS /1-7ranges         ( Freq.Changes at each range)   6.Trigger Output        Output Method: C-MOS (74HCO2)(50次 Load, ≡1V)        Pulse width     : about 20nS   7.OSC output        Output Method: C-MOS (74CO4)( 50次 Load, ≡1V)   8.Frequency counter        Display               : 4 digits, high brightness LED display        Range                : 10Hz-20MHz        Accuracy            : 0.01%㊣1digit        Sensitivity           : 50mVrms,10Hz-20MHz        Max. Input Level : 140Vp-p        Input Resistance: 1M次   9.Power         Voltage      : AC100ㄛ120ㄛ220ㄛ230㊣10%     Frequency: 50HZ, 60HZ   10.Power Consumption : <15VA   11.Working environment         Temperature: +5∼C - +40∼C Humidity : <85%RHㄗ+40∼C)