Trash > PROJECTS, ROBOTICS, KITS & PARTS > Servo Motor Controller Board

Servo Motor Controller Boards 4, 5, & 8 Servo motor Controller Boards (Manual & WIN PC Control) (1) 4 Servo motor Controller - Manual & WIN PC Control (Serial Port) SMCB-04 Servo motor Controllers allow Manual & PC control of four hobby servo motors (Hitec / Futaba). Servomotors may be controlled manually, via on-board switches, or by a Windows program through a serial communication port (RS232) on a Windows 98/XP PC. Universal three position headers make it easy to connect servomotors--just plug them into the board. Manual Control: Each servo motor is controlled using a three-position switch on the servomotor board. Each switch position controls the servo motor in the following manner: UP = clockwise, DOWN = counterclockwise, and stop is the CENTER off position. Windows PC Control: Windows 98 and Windows XP programs, (includes CDRom programs) see screen image, use the PC serial port to communicate to the servo motor board. Each program incorporates an adjustable servomotor speed control. Each servo motor is controlled by an individual slider. In the script writing mode every servomotor movement is automatically recorded and written into the onscreen script area. The onscreen script may be saved, loaded, played, and looped. Updated Windows PC programs are always available for download at the Troper web site www.troper.com   Power can be supplied by either a 9 volt battery or an AC adaptor. The on-board rectifier, voltage regulator, filter capacitors, and plug adaptor makes it easy use a wide range of AC adaptor for power (7-12 VDC or 7-12 VAC). Compatible with most servos, including; the following HiTec servo motors: HS-311, HS-322, HS-325, HS-422, HS-425BB, HS-475, HS-525BB, HS-525MG, HS-545BB, HS-625MG, HS-635HB, HS-645MG, HS-925MG, HS-945MG, HS-5475HB, HS,5625, HS-5925MG, HS-5945MG, HS-5955TG, HSR-5995TG, HSC-5996TG, HSC-5997TG, HSC-5998TG, HS-6635HB, HS-6965HB, HS-6975HB, HS-6985HB and the following Futaba servo motors: S-148, S-3001, S-3003, S-3004, S-3005, S-3010, S-9001, S-9202, S-9206, S-9402, S-9405 Downloadable 4-servo controller program for Windows XP (2.0 MB) Downloadable 4-servo controller program for Windows 98 (1.8 MB)   (2) 5 Servo motor Controller - Manual & WIN PC Control (Serial Port) SMCB-05 Servomotor Controllers allow Manual and PC control of five hobby servomotors (Hitec / Futaba). Servomotors may be controlled manually, via on-board switches, or by a Windows program through a serial communication port (RS232) on a Windows 98/XP PC. Universal three position headers make it easy to connect servomotors--just plug them into the board. Manual Control: Each servomotor is controlled using a three-position switch on the servomotor board. Each switch position controls the servomotor in the following manner: UP = clockwise, DOWN = counterclockwise, and stop is the CENTER off position. The Controller board has two preset speeds (fast and slow) that is jumper controlled. The board also has a “save” function that saves the servomotor’s current position in its memory. This allows the servomotors to be in, or go to, the “saved” position on startup. Windows PC Control: Windows 98 and Windows XP programs, (price includes CD ROM programs) see screen image, use the PC serial port to communicate to the servomotor board. Each program incorporates an adjustable servomotor speed control. Each servomotor is controlled by an individual slider. In the script writing mode every servomotor movement is automatically recorded and written into the onscreen script area. The onscreen script may be saved, loaded, played, and looped. Updated Windows PC programs are always available for download at the Troper web site www.troper.com Power can be supplied by either a 9 volt battery or an AC adaptor. The on-board rectifier, voltage regulator, filter capacitors, and plug adaptor makes it easy use a wide range of AC adaptor for power (7-12 VDC or 7-12 VAC). Available in kit form (SMCB-05) or pre-assembled and tested (SMCB-05A). Compatible with most servos, including; the following HiTec servo motors: HS-311, HS-322, HS-325, HS-422, HS-425BB, HS-475, HS-525BB, HS-525MG, HS-545BB, HS-625MG, HS-635HB, HS-645MG, HS-925MG, HS-945MG, HS-5475HB, HS,5625, HS-5925MG, HS-5945MG, HS-5955TG, HSR-5995TG, HSC-5996TG, HSC-5997TG, HSC-5998TG, HS-6635HB, HS-6965HB, HS-6975HB, HS-6985HB and the following Futaba servo motors: S-148, S-3001, S-3003, S-3004, S-3005, S-3010, S-9001, S-9202, S-9206, S-9402, S-9405 Downloadable 4-servo controller program for Windows XP (2.0 MB) Downloadable 4-servo controller program for Windows 98 (1.8 MB)   (3) 8-Servo Motor Controller Windows PC Control (Serial Port) SMCB-08 Servomotor Controllers allow the PC control of eight hobby servomotors (Hitec / Futaba). Servomotors are controlled by a Windows program through a serial communication port (RS232) on a Windows 98/XP PC. Universal three position headers make it easy to connect servomotors--just plug them into the board. Windows PC Control: Windows 98 and Windows XP programs, (includes CD Rom programs) see screen image, use the PC serial port to communicate to the servomotor board. Each program incorporates an adjustable servomotor speed control. Each servomotor is controlled by an individual slider. In the script writing mode every servomotor movement is automatically recorded and written into the onscreen script area. The onscreen script may be saved, loaded, played, and looped. Updated Windows PC programs are always available for download at the Troper web site www.troper.com Power can be supplied by either a 9 volt battery or an AC adaptor. The on-board rectifier, voltage regulator, filter capacitors, and plug adaptor makes it easy use a wide range of AC adaptor for power (7-12 VDC or 7-12 VAC). Available in kit form (SMC-08) or pre-assembled and tested (SMC-08A). Compatible with most servos, including; the following HiTec servo motors: HS-311, HS-322, HS-325, HS-422, HS-425BB, HS-475, HS-525BB, HS-525MG, HS-545BB, HS-625MG, HS-635HB, HS-645MG, HS-925MG, HS-945MG, HS-5475HB, HS,5625, HS-5925MG, HS-5945MG, HS-5955TG, HSR-5995TG, HSC-5996TG, HSC-5997TG, HSC-5998TG, HS-6635HB, HS-6965HB, HS-6975HB, HS-6985HB and the following Futaba servo motors: S-148, S-3001, S-3003, S-3004, S-3005, S-3010, S-9001, S-9202, S-9206, S-9402, S-9405 Downloadable 4-servo controller program for Windows XP (2.0 MB) Downloadable 4-servo controller program for Windows 98 (1.8 MB)